Features

1 Support WIFI network. (Attention: The switch module must keep connect with wifi service.)

2 Support three working modes: self-lock, inter-lock and momentary control.

3 Support Max 8 timing tasks for each added device.

4 Support status tracking, home appliances status timely feedback to your App.

5 Support 433mhz RF remote transmitter control.(Can learn most 433.92mhz transmitter, like chip 2260,2262,2264,1527. Allow 16 different transmitters to control )

Product Specification:

1 Input voltage: AC 60-270V

2 Output voltage: AC 60-270V

3 Maximum load: 10A

4 Working temperature: 0-60 centigrade

5 IN+ connect with Live wire; IN- connect with Null wire;

6 Control method: WIFI +RF + Manual Button Control

7 Channels: 4 Way

8 Switch size: 100*80*28mm

9 Active output, when you supply 220V power, the output will be 220V also.

10 Support system: Android/IOS

How to connect phone with switch?

1 Download and install the software of eWeLink from APP store or Google play store.

2 Follow eWeLink instructions to register an account on it.

3 Log in your account of eWeLink.

4 Press any manual control button (S1,S2,S3,S4) for 5 seconds until you see the D2 light flash quickly, then release it. Now add device on mobile phone by eWeLink APP according its introduction.

5 Now you can use your phone to control the switch under 2G/3G/4G signal.

6 You can name your own device and control it only by yourself.

7 You can also share your device with your family or friends.

How to learn 433mhz transmitter?

1 Press learning button until you see LED flash 1 time, release button, then CH1 learn.

2 Press learning button until you see LED flash 2 times, release button, then CH2 learn.

3 Press learning button until you see LED flash 3 times, release button, then CH3 learn.

4 Press learning button until you see LED flash 4 times, release button, then CH4 learn.

After learn 433mhz signal, you still can\'t use your remote to control it. Follow below steps.

Step 1: Cut off power supply;

Step 2: Keep pressing "learning button";

Step 3: Supply power;

Step 4: The LED flash 3 times then release button. OK!

How to clear 433mhz signal?

Step 1: Keep pressing the "learning button" ;
Step 2: Supply power to switch;
Step 3: The LED light will flash 4 times slowly.
Step 4: Release the "learning button". OK.

How to set working mode?

Supply AC 60-270V power to the relay.

1: Press mode button until you see D3 flash 3 times, release button, now it is self-lock.

2: Press mode button until you see D3 flash 2 times, release button, now it is inter-lock.

3: Press mode button until you see D3 flash 1 time, release button, now it is momentary.

What is the difference between working mode?

1 Self-lock: Press remote button A , receiver CH1 ON. press button A again, then receiver CH1 OFF

2 Inter-lock: Press remote button A , receiver CH1 ON, and receiver CH2,CH3,CH4 OFF.

3 Momentary: Press remote button A, receiver CH1 ON. After 1 seconds, receiver CH1 OFF

1 Where can I use this switch?

First, I have a wireless router and WIFI service in my house;

Second, I install this switch in the range of wireless router WIFI signal.

Third, I connect my phone with the switch under wireless router WIFI service.

Then you can go anywhere to control it now.

2 Where can I download the APP?

APP store and Google Play store---- eWeLink

3 Can I install this switch in my car?

Yes, but I have to install a wireless router and have WIFI service in the car, then it is Ok.

4 How many people can control my WIFI switch?

I can share this switch to as many people as I can.