Key Specifications:
- Camarray Quadrascopic Stereo Camera HAT
-
Support Raspberry Pi 3B/3B+/4B and Jetson Nano/NX
-
Two/Three/Four MIPI camera inputs and one MIPI camera output
-
Support 1/2 lane MIPI cameras input up-to 1Gbps/lane
-
Support 2 lane MIPI output up-to 1Gbps/lane
-
Support RAW8/RAW10/RAW12 output format, the output format automatically changes with the input format
-
Support standard V4L2 framework, Video Nodes and Controls (Exposure, Gain and depending on camera parameters)
-
Support Arducam cameras up to 12MP with proprietary camera driver with full resolution combine
-
Support Two/Three/Four MIPI camera side-by-side combine, channel 0/1/2/3 software switching on the fly
-
HAT Size: 65 x 56 mm
-
Sensor: Monochrome global shutter OV9281
-
Pixel Size: 3 μm x 3 μm
-
Active Array Size: 1280 x 800
-
Optical Size: 1/4 inch
-
Focusing Range: 30mm ~ infinite
-
IR Sensitive: No IR filter, sensitive to IR
-
Output interface: 2-lane MIPI serial output
-
Video Modes: 8-bit RAW, 45fps@1280*4 × 800 with Arducam driver on Jetson Nano/Xavier NX; 30fps@1280*4 × 800 with Arducam driver on Rpi
-
Board Size: 40mm x 40mm
-
Optical Format: 1/2.7”
-
Distortion: <1%
-
Effective Focal Length: 2.8mm
-
FOV on 1/4” RPi Camera: 70° (H)
-
F/NO: 2.8
-
Mount: M12
-
Size: 14mm x 15.6mm
-
Weight: 4g
Package Including:
-
4 pcs 1MP OV9281 global shutter camera module with low distortion M12 lens
-
1 pcs Arducam Camarray quadrascopic stereo camera HAT
-
4 pcs 150mm/6inch 22pin to 22pin camera cables
-
1 pcs 300mm/12inch 15pin to 22pin camera cable
-
1 pcs 73mm/2.87inch 15pin to 22pin camera cable
-
4 pcs M2.5*10mm Nylon Hex Standoffs
-
4 pcs M2.5 Nylon Nuts
-
4 pcs M2.5*6mm Nylon Screws
-
