Grove-GPS (Air530) is a high-performance, highly integrated multi-mode satellite positioning and navigation module, supporting plenty of location systems, such as GPS/Beidou/Galileo and etc.
PRODUCT DETAILS
Feature
-
Positioning error within 10 meters
-
Multi-mode satellite positioning & navigation and support more than 6 satellites at the same time
-
The position still quickly and accurately under the condition of bad signal
-
Low power consumption at only 31uA
-
Compatible hard/soft interface for other modules
-
Adopt the integrated design of RF baseband, which integrates DC/DC, LDO, LNA, RF front-end, baseband processing, 32-bit RISC based chip, RAM, FLASH storage, RTC and power management functions
Description
Confused about your GPS not working well in urban or outsides under only one or a few satellite module? Then you should not miss our new Grove-GPS (Air530). It's a high-performance, highly integrated multi-mode satellite positioning and navigation module to use with Arduino. It supports GPS / Beidou / Glonass / Galileo / QZSS / SBAS, which makes it suitable for GNSS positioning applications such as car navigation, smart wear, and drone. Meanwhile, this module is capable of receiving more than 6 satellites at the same time and is able to work excellently even if there's a very bad signal.
Grove – GPS Module vs Grove – GPS (Air530)
|
Specs |
Grove – GPS Module |
Grove – GPS (Air530) |
|
Size |
40mm x 20mm x 13mm |
40mm x 20mm x 13mm |
|
Update Rate |
1Hz, max 10Hz |
– |
|
Baud Rate |
9,600 – 115,200 |
9600 –921600 |
|
Navigation Sensitivity |
-160dBm |
–166dBm |
|
Power Requirements |
3.3/5V |
3.3/5V |
|
Number of Channels |
22 tracking, 66 channels |
– |
|
Time to first start |
Cold start: 13s |
Cold start: 30 seconds |
|
Antennas |
Antenna included |
Antenna included |
|
Accuracy |
2.5m GPS Horizontal Position Accuracy |
2.5m Horizontal positioning accuracy |
Specification
|
parameters |
values |
|
|
Supply voltage |
3.3V/5V |
|
|
Working current |
up to 60mA |
|
|
Interface |
UART |
|
|
Time of warm start |
4s |
|
|
Time of cold boot |
30s |
|
|
Working Temperature |
-35C-85°C |
|
|
Storage Temperature |
-55°C-100°C |
|
|
Humidity |
5%-95% |
|
|
|
Pure hardware cold start |
27.5s |
|
Pure hardware hot start |
<1S |
|
|
Pure hardware recapture |
<1S |
|
|
Software-assisted A-GNSS |
<5S |
|
|
|
Cold start |
-148dBm |
|
Hot Start |
-162dBm |
|
|
Recapture |
-164dBm |
|
|
Track |
-166dBm |
|
|
|
Horizontal positioning accuracy |
2.5m |
|
High positioning accuracy |
3.5m |
|
|
Speed accuracy |
0.1m/s |
|
|
Time transfer accuracy |
30ns |
|
|
|
Capture current value3.3V |
42.6mA |
|
Tracking current value3.3V |
36.7mA |
|
|
Low power mode3.3V |
0.85mA |
|
|
Ultra-low-power mode3.3V |
31uA |
|
Pinout
Applications
-
GPS tracker
-
GPS navigation
-
Distance measurement
-
Car navigation
-
Drone
Part list
|
Items |
Values |
|
GPS (Air 530) board |
1 |
|
Grove cable |
1 |
Cautions
-
The input power supply voltage of Grove power supply interface, should not exceed 5.6V, otherwise it may damage the device.
-
The voltage of the selected button battery should not exceed 3V, or it will probably damage the device.