Warm tip:Our shop due to the meager profit, most of the modules only provide description or send information, no technical advice support, please start to learn to shoot carefully!
This product is available with battery, requires battery-free models please contact customer service to customize.
Without any technical support, those without electronic experience should be cautious! Parents who return money need to pay round-trip freight!
A full-color display multi-functional test instrument
1, can measure three tubes, two tubes, resistance, capacitance, inductance, thyristor, field effect tube, regulator tube, double two pipe, light emitting two tube
2. The voltage can be measured
3, built-in lithium battery, long battery life
explain
@Please use external 5V power supply or mobile phone USB power supply for charging
@ indicator isgulesIndicates charging, and the indicator light isgreenIndicates that charging is complete
reminder:The charging input voltage is 6V, please do not use it under overpressure, otherwise the tester will be damaged and the battery may explode
4. Infrared decoding function
Aim the infrared remote controller at the "IR" test hole of the tester, and press the button of the remote controller
If the tester decodes successfully, the user code and data code are displayed, along with the corresponding infrared waveform.
IfDecoding failedOrUnable to decode,The user code and data code are not displayed. At this time, if it is in the tester interface, it cannot enter the infrared decoding interface. If it is in the infrared decoding interface, it still displays the last successful decoding information
The dot in the upper right corner is used to indicate whether the infrared data of the remote control is received. Red indicates that the infrared data is being received, and blue indicates that the decoding is successful
5. Automatic calibration
Short-connect the three test seats, and press the multifunction button briefly, and the tester will automatically calibrate.
No further action is required after the short wiring is disconnected according to the prompts during calibration.
3.5inch Colorful Display Multi-functional TFT Backlight Transistor Tester for Diode Triode Capacitor Resistor Transistor LCR ESR NPN PNP MOSFET
Features:
It can also be used to detect infrared wave forms.
Zener Diode Detect Area: 0.01-30V
Power Mode: Rechargeable Lithium Battery ( INCLUDED)
