Raspberry Pi 4 Model B mSATA SSD X857 V2.0 Shield + X735 Power Management Board + X857-C3 Matching Metal Case

• Not include raspberry pi 4 and mSATA SSD

• X857 V1.2 is not be producted, and X857 V1.2 is upgraded to X857 V2.0
• X857 V2.0 is not support TRIM, only support UASP!
• A microSD card is required for forcing the Raspbian OS to use the HDD/SSD for its "root" partition
• USB 3.0 devices might generate radio frequency interference that can cause Wi-Fi and other wireless devices operating in the 2.4GHz band to have issues communicating with your Raspberry Pi4. To avoid interference on the 2.4GHz band using Wi-Fi, try using the 5GHz band instead. If problem still exists, please turn off WiFi and use the wired network instead.

• WARNING:

  • Do not power your Raspberry Pi via the Pi's 40-pin header and type-C socket at the same time.

  • This X857 mSATA board is only suitable for raspberry pi 4, if you need mSATA SSD board for raspberry pi 3b+/3b, please refer to:X850 mSATA Board

  Installation video：

  • youtu.be/HGPpfDbfyxM

  X857 Board Features：

  • Ideal storage solution for Raspberry Pi 4 - mSATA SSD Shield

  • Supports up to 2TB mSATA solid-state drive (SSD)

  • Integrated USB 3.1 Gen1 to SATA 6Gb/s bridge controller

  • Integrated high efficiency step-Down Converter, 3.3V max 4A to power the SSD

  • Allows booting OS from your HDD/SSD for faster app opens, web serving and file copying (see notes)

  • LED blue indicator indicates drive status

  • External self-powered or USB bus-powered

  • Onboard DC jack & XH2.54 connector for extra SSD power supply (Additional power may be required only when using a large capacity hard disk)

  • PCB Size 85mm x 56mm

  • Fully compatible with X735 for intelligent power management and cooling your Raspberry Pi

  • Fully compatible with X710 for wide input voltage (6~36V) and intelligent power management

  • Fully compatible with X765 for powering over Ethernet (POE, 5V 5A)

  • Fully compatible with X725 for uninterruptible power supply (18650 UPS, 5.1V 8A, WOL)

  Power Supply I/O ports：

  • Power supply: 5Vdc +/-5% , Powered via Pi's USB port

  • 5Vdc via micro-USB socket

  • Ports & Connectors: USB socket - USB 3.0 type A x1

  • 52P Mini PCI-E mSATA slot x1

  X735 V2.5 Board Features：

Some new features of X735 v2.5:

• Use the silent PWM cooling fan, and support fan speed is control by script, support read fan speed, and we provide sample python code.

• You must install shell script to enable the PWM fan work fine since it's a PWM fan, refer to X735 V2.5 Software

• Support TRUE AUTO ON function (in the old version,the power management function is disabled if AUTO ON is enabled)

• Considering that some customers use X735 together with other DAC shield, we adjusted the GPIO pins used.

• Please install shell script to get safe shutdown function. please refer to X735 V2.5 Software

• Remove the 2pin power cable from X735 v2.5

• No any size changes.

NOTE：

• Full poweroff through software is not supported when using latching power switch

• Do not apply power to your Raspbeery Pi via the Pi's Micro-USB socket

Features：

• Intelligent and safe power management

• Equipped with both momentary button and latching switch for easy power control

• Press the momentary button or external momentary power switch to turn on

• Press the momentary button or external momentary power switch and hold for 1~2seconds to reboot

• Press the momentary button or external momentary power switch and hold for 3~7seconds to implement safe shutdown

• Press the momentary button or external momentary power switch and hold for more than 8 seconds to force shutdown

• Supports safe shutdown and full poweroff through software

• On-board switch convenient to select latching or momentary power control switches

• Press the latching power switch once to turn on and again to implement safe shutdown

• On-board LED shows the status of power on, reboot and shutdown

• On-board PH2.0 connectors allows to use external latching switch or momentary button

• Powers the Raspberry Pi via the 40-pin header - no additional cabling required

• Allows power input via DC jack or Micro-USB socket or XH2.54 connector

• Allows power output via XH2.54 socket and or the 40-pin header

• PWM Cooling Fan for X735 V2.5

• Dedicated PWM cooling fan for Raspberry Pi

• Air flow up to 6.01CFM and maximum speed of 5000 RPM

• Smooth PWM adjustment provides a quiet experience

• Real-Time fan speed reading

• Programmable temperature and fan speed

Packing List：

Bundle1:

• 1 x X857 V2.0 mSATA SSD Storage Expansion Board

• 1 x X735 V2.5 Power Management Board

• 1 x X857-C3 Metal Case with Cooling Fan（4010）& Power Control Switch