Raspberry Pi X820 V3.0 SSD&HDD SATA Storage Board Matching Metal Case / Enclosure + Power Control Switch + Cooling Fan Kit

Load image into Gallery viewer, Raspberry Pi X820 V3.0 SSD&HDD SATA Storage Board Matching Metal Case / Enclosure + Power Control Switch + Cooling Fan Kit

Raspberry Pi X820 V3.0 SSD&HDD SATA Storage Board Matching Metal Case / Enclosure + Power Control Switch + Cooling Fan Kit

Regular price: $24.74
Sale price: $24.74
Regular price
Unit price: per

This case is for X820 V3.0 Expansion Board and Raspberry Pi 3B+(plus)/3B/2B/B+ ; not supportsX820 V1.3
The Max. compatible thickness of the 2.5" SATA SSD/HDD is 10.4mm/0.41inch. (The stander 2.5" SATA SSD/HDD is 9.2mm/0.36inch)
Please remove the Jumber cap when you use the power swtich to control the power of raspberry pi and X820 storage board

Packing List:

1 x Metal Case (with screws) for X820 V3.0 Expansion Board & PI3
1 x Power Control Switch
1 x Mini Fan (with screws)

Overview:

This is a metal case with a super quiet fan assembly, High quality with good lacquer.
Easy to install, protect your X820 board and Raspberry pi board better.
Updated GPIO/FFC Cable Side Slot on the case
Updated Slot for X735 DC power Port and X735 microusb port
Compatible with Raspberry Pi 3 Model B+(plus)/3B/2B/B+
Installation guide, please refer to: http://www.raspberrypiwiki.com/index.php/X820

What do you need to use Raspberry Pi X820 V3.0 2.5 inch SATA Storage Board?

A Raspberry Pi board(Pi 3B+, 3B, 2B, B+)
A Raspberry PiX820 V3.0 SSD&HDD SATA Storage Board
A DC5V 4A Power Supply
A 2.5 inch SATA hard disk drives (HDD) or solid-state drive (SSD)
AX820 V3.0 use match metal casekit(optional)