Overview
-
We reduced the height of the case by 3mm;
-
We adjusted the position of SSD led;
-
No more
-
This is new version X857-C3 metal case with power control switch and super mute cooling fan designed for Raspberry Pi 4 Model B and X857 V2.0 mSATA SSD Shield/ X862 V2.0 M.2 NGFF Shield/ X873 NVME M.2 Shield.
-
Please note that the X857-C3 case DON'T SUPPORT X857 V1.2 / X862 V1.0 / X872 V1.1 / X873.
-
It supports X735 installation for intelligent power management and cooling your Raspberry Pi, also supports X708/U100 UPS with battery holder installation for UPS function. The equipped cooling fan is installed on the side of the battery holder to provide better heat dissipation.
-
High quality metal material with surface galvanized process
-
Equipped with super mute cooling fan
-
Equipped with power switch with beautiful LED indicator to control the power of X857 V2.0/X862 V2.0/X873 and the Raspberry Pi 4; (LED indicator can be disable)
-
Easy to install, all main connectors are easily access to use;
-
Case Size(Installation): 11.4cm x9.5cm x 5.5cm / 4.48inch x 3.74inch x 2.16inch
-
Supports X735 installation for intelligent power management and cooling your Raspberry Pi
-
Supports X708/U100 UPS with battery holder installation for UPS function
-
Supports battery holder installation for UPS function
X857 V2.0 mSATA SSD Expansion Board
-
Ideal storage solution for Raspberry Pi 4 - mSATA SSD Shield
-
Supports up to 2TB mSATA solid-state drive (SSD)
-
Integrated USB 3.1 Gen1 to SATA 6Gb/s bridge controller
-
Allows booting OS from your HDD/SSD for faster app opens, web serving and file copying (see notes)
-
LED blue indicator indicates drive status
-
PCB Size 85mm x 56mm
-
X857 V2.0 version supports UASP but not TRIM.
X735 Key Features
Intelligent and safe power management
-
Equipped with both momentary button and latching switch for easy power control
-
Press the momentary button or external momentary power switch to turn on
-
Press the momentary button or external momentary power switch and hold for 1~2seconds to reboot
-
Press the momentary button or external momentary power switch and hold for 3~7seconds to implement safe shutdown
-
Press the momentary button or external momentary power switch and hold for more than 8 seconds to force shutdown
-
Supports safe shutdown and full poweroff through software
-
On-board switch convenient to select latching or momentary power control switches
-
Press the latching power switch once to turn on and again to implement safe shutdown
-
On-board LED shows the status of power on, reboot and shutdown
-
On-board PH2.0 connectors allows to use external latching switch or momentary button
-
Powers the Raspberry Pi via the 40-pin header - no additional cabling required
-
Allows power input via DC jack or Micro-USB socket or XH2.54 connector
-
Allows power output via XH2.54 socket and or the 40-pin header
Auto cooling function
-
Dual trip point temperature controlled cooling fan
-
Auto-Control the fan for Cooling / quiet Operation
-
Board temperature ≤34C - Fan running at low speed
-
Board temperature ≥34C - Fan running at medium speed
-
Board temperature ≥45C - Fan running at full speed
-
On-board LEDs show the status of fan running low and high
-
No driver and additional setting required for the cooling fan
Others
-
Reserved 40-pin stackable Header for Add-On Boards
-
Works with all current models of the Raspberry Pi using a 40 pin header
-
1 x X857-C3 Metal Case
-
1 x Cooling Fan（4010）
-
1 x Power Control Switch
-
1 x Screws Pack
-
1 x Screw Drive
-
Bundle1+X857 V2.0 Board + X735 V2.5 Board
-
Bundle2+ DC 5V 4A Power Suplly(EU)
-
Bundle2+ DC 5V 4A Power Suplly (US)if you need a UK plug ，please leave us a message .
