X862 V2.0 M.2 NGFF 2280 SATA SSD Storage Expansion Board for Raspberry Pi 4 Model B
NOTES:
-
Not include Raspberry Pi 4 & M.2 Key-B SSD
-
Only compatible with Key-B SSD length 2280
-
Compatible with M.2 NGFF SATA SSDs only, not compatible with NVMe M.2 SSDs
-
As with all SSDs, new media must be formatted before use
-
SSDs use exceptionally high performance storage media that will run hot when under load
-
Older SSD drives with less efficient flash media may not perform as well as newer drives
Matching Metal Case:
-
If you use X857-C3 metal case, it will not support 2.4GHz, please try using the 5GHz band instead. The X857-C1 case does not support X862 V2.0
Overview:
-
This is new updated X862 V2.0 version from X862 V1.0. We solve the EMC interference issue between Raspberry Pi 4 and USB3.0 device.
-
The X862 V2.0 M.2 NGFF SATA SSD Shield is designed for Raspberry Pi 4 model B, it provides a complete storage solution for Raspberry Pi 4. New X862 V2.0 ONLY support M.2 NGFF SSD Key-B 2280 length. The X860 V2.0 support UASP.
Wiki: raspberrypiwiki.com/X862 V2.0
Operating System：
-
All Raspberry Pi operating systems
Key Features：
-
Ideal storage solution for Raspberry Pi 4 - M.2 NGFF SATA SSD Shield
-
Supports up to 2TB M.2 NGFF SSD solid-state drive
-
Only supports M.2 NGFF SSD 2280 length
-
UASP supported for Raspberry Pi 4
-
Integrated USB 3.1 Gen1 to SATA 6Gb/s bridge controller
-
Integrated high efficiency step-Down Converter, 3.3V max 4A to power the SSD
-
USB3.1 Gen1 5Gb/s connectivity offers plug-and-play functionality on your Raspberry Pi 4
-
Allows booting OS from your HDD/SSD for faster app opens, web serving and file copying (see note 2)
-
LED blue indicator indicates drive status
-
Specially-made USB3.1 jumper to connect with Raspberry Pi - no cabling required!
-
Fully compatible with X735 for intelligent power management and cooling your Raspberry Pi
-
Fully compatible with X710 for wide input voltage (6~36V) and intelligent power management
-
Fully compatible with X765 for powering over Ethernet (POE, 5V 5A)
-
Fully compatible with X728 for uninterruptible power supply (18650 UPS, 5.1V 8A, smart power mgmt)
Specification：
Power supply:5Vdc +/-5% , Powered via USB port by Raspberry Pi 4
Ports & Connectors：
-
USB socket - USB 3.0 type A x1
-
67Pin M.2 connector P=0.5mm, H3.2mm, Key B x1
-
PCB Size 87mm x 56mm
Packing List：
Bundle1:
-
1x X862 M.2 NGFF SATA SSD Shield
-
1x USB3.1 jumper
-
4x Screw M2.5 *6mm
-
4x Spacer M/F M2.5 *7+6mm
-
4x Spacer F/F M2.5 *9.5mm
-
1x Screw driver
-
1x Screw M2 *4mm
Bundle2:
-
Bundle1+ Embedded Heatsink(P165-B ) + Acrylic plate
Bundle3:
-
Bundle2+ 3010 Fan
