Squama Ethernet - Ard W5500 Ethernet Board with PoE Squama CAN FD to Ethernet board with PoE  Custom PCB pcba machinery
Squama Ethernet - Ard W5500 Ethernet Board with PoE Squama CAN FD to Ethernet board with PoE  Custom PCB pcba machinery
Squama Ethernet - Ard W5500 Ethernet Board with PoE Squama CAN FD to Ethernet board with PoE  Custom PCB pcba machinery
Squama Ethernet - Ard W5500 Ethernet Board with PoE Squama CAN FD to Ethernet board with PoE  Custom PCB pcba machinery
  • Load image into Gallery viewer, Squama Ethernet - Ard W5500 Ethernet Board with PoE Squama CAN FD to Ethernet board with PoE  Custom PCB pcba machinery
  • Load image into Gallery viewer, Squama Ethernet - Ard W5500 Ethernet Board with PoE Squama CAN FD to Ethernet board with PoE  Custom PCB pcba machinery
  • Load image into Gallery viewer, Squama Ethernet - Ard W5500 Ethernet Board with PoE Squama CAN FD to Ethernet board with PoE  Custom PCB pcba machinery
  • Load image into Gallery viewer, Squama Ethernet - Ard W5500 Ethernet Board with PoE Squama CAN FD to Ethernet board with PoE  Custom PCB pcba machinery

Squama Ethernet - Ard W5500 Ethernet Board with PoE Squama CAN FD to Ethernet board with PoE Custom PCB pcba machinery

Regular price
$35.00
Sale price
$35.00
Regular price
$75.00
Sold out
Unit price
per 

 
Features
  • Powerful CPU: ARM Cortex-M0+ MCU running at up to 48MHz (ATSAMD21G18)

  • Flexible power manual: PoE or Type-C

  • Various Hardwired TCP/IP Protocols support: TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE

  • Flexible compatibility: Compatible with Ard IDE

Description

Squama is a series of products. This series of products have a standard appearance, with a general size of 62x30mm. The series integrates an MCU and peripherals with a communication function, which is suitable for IoT-related applications.

Squama Ethernet is the first product in the Squama series. Squama Ethernet integrates a high-performance microcontroller based on Cortex M0+ and an Ethernet control chip W5500, which can be used by users to develop Ethernet applications.

WS2812 LED and user buttons are also integrated on the board, which can facilitate some interaction. More importantly, Squama Ethernet supports PoE (Power Over Ethernet), which makes the wiring more concise. Only one network cable is needed to complete signal transmission and power supply.

Squama Ethernet use the Ard Zero like bootloader, you can use Ard IDE to develop your application easily.

Specifications 

  • MCU: ARM Cortex-M0+ CPU running at up to 48MHz

  • Clock speed: 48MHz

  • Flash memory: 256KB

  • RAM: 32KB

  • Input voltage: 5V via USB and 48~57V via PoE

  • Output Current @ 5V: 2A

  • Size: 62x30 mm

  • Weight: 15g (without PoE), 20g (with PoE)

  •  8 independent sockets simultaneously

  • High-Speed Serial Peripheral Interface(SPI MODE 0, 3)

  • Internal 32Kbytes Memory for TX/RX Buffers

  • 10BaseT/100BaseTX Ethernet PHY embedded

  • Supports Auto-Negotiation (Full and half-duplex, 10 and 100* based )

  • Not supports IP Fragmentation

  • WS2812B Led

  • Reset Button and User Button

  • Grove connector for I2C and UART

  • Arduino Zero bootloader

  • Supports Power-down mode

  • Supports Wake on LAN over UDP

 

Hardware Overview

 

1. LED indicators:

  • S:

  • P: Power

  • L: D13

2. RJ45 Connector, 10/100M

3. WS2812B LED, connected to D12

4. User button, connected to D11

5. PoE Cape

6. Pinout1

7. I2C

8. UART (Use Serial2 in the code)

9. TypeC connector for programming

A. Pinout2*

B. Reset Button

C. ATSAMD21G18 chip

 

Pin output

 

Part List

Squama Ethernet Dev Board x 1

PoE Cape x 1 (only for the PoE Version)