Tang features Anlogic EG4S20 FPGA – unrelated to Amlogic – which run a RISC-V softcore, and all is packaged in a small small form factor
Specifications:
-
Core unit: Anlogic Technologies EG4S20
-
Logical unit: 20K (LUT4/LUT5 hybrid architecture)
-
SRAM: About 130KB
-
SDRAM: Built-in 32bit bit width 64MBit
-
Flash: FPGA configuration Flash, 8Mbit User Flash, nor/nand optional
-
Download and debug: Onboard FPGA JTAG Download Debugger, RV debugger can debug hummingbird core
-
Interface:
- FPC40P socket, can be connected to RGB LCD, VGA adapter board
- FPC24P socket, can be connected to DVP camera, high speed ADC module
- Resistive touch screen controller for I2C interface, used with RGB LCD
-
Pin and lead:
- The adjacent pins LVDS are drawn in the same length, leading out 8 GCLKs, and all 8 ADCs are taken out.
- Double row pin spacing 900mil, compatible with breadboard development
- Half hole leads to an extra 40 IO, and the whole board leads to 130+ IO
-
Electrical characteristics:
- Micro USB 5V power supply; 2.54mm pin
- 3.3V~5V power supply; 1.27mm stamp hole power supply
- 3-channel DCDC power supply chip, stable and efficient power supply
- independent adjustment of Bank0 IO level
Target application scenario
-
High-speed communication interface interconnection
-
Learning, debugging, research of soft cores such as RISC-V
-
Machine vision processing
-
Parallel computing acceleration
|
Size and weight |
|
|
Development board size |
25.4x56.0mm |
|
Development board weight |
6.2±0.1g |
|
Precautions |
|
|
RV debugging |
When using the RV debugger, if you need to use USB power, try to use a shorter USB cable. |
|
Micro-USB |
The USB interface can be used for power supply, and the interface is fragile. Please pay attention to the use. |
|
Download and debug |
On-board FPGA JTAG download debugger, debugging hummingbird core requires other debuggers, such as RV, JLink |
|
Operating temperature |
-20~85℃ |
|
Power consumption and current |
No-load current is about 50mA |